خط تولید نمد صنعتی Autefa,hergeth,temafa

مستقر در خارج از کشور با مشخصات زیر:
Needle felt production line for glass fibre & synthetic fibre products composed of one bale opener, two carding machines, one cross lapper, one needle loom and accessories. The line has the capability to produce felts in max. 2.800mm product width. Product range: 150 – 2.200 g/m²: Capacity: 400 kg/h The line is controlled by a centralized control system; the bale opener and the edge trim opener each have a separate control system. The control system is partially modernized / upgraded. All adjustable drives are driven by frequency inverters. The line is equipped with a suction system for hopper feeders, doffers and needle loom. The line is in running conditions and was producing needle felt during the inspection. Consists of: Bale opener 2x Carding machine Crosslapper Needle loom with CBF End of line Edge trim opener Detail of each part: Pos.1 Bale opener Make: Temafa Type: unknown Year: unknown (approx. 1989) Working width: 1,4m Feeding table length: 2,5m Accessories: - Edge trim condenser+ fan - transport fan Machine is complete and fully functional Pos. 2 Card No. 1 Make: Befama Type: unknown Year: unknown Working width: 1,8m Setup: - Card feeder (hopper) - Breast cylinder - Main cylinder, diameter approx. 1.200mm, with 4x worker / stripper - Single doffer with fly comb Accessories: Non Machine is complete and fully functional Pos. 3 Card No. 2 Make: Befama Type: unknown Year: unknown Working width: 1,8m Setup: - Card feeder (hopper) - Breast cylinder - Main cylinder, diameter approx. 1.200mm, with 4x worker / stripper - Single doffer with fly comb Accessories: Non Machine is complete and fully functional Pos. 4 Cross lapper Make: Hergeth Type: unknown Serial-No.: unknown Year: unknown Inlet width: 2,8m Exit width: 4,2m Change of direction with reversing gearbox controlled by compressed air coupling Accessories: Non Machine is complete and fully functional Pos. 5 Needle loom Make: Dilo Type: OD-II/30 Serial-No.: 5932 Year: 1986 Needles: 2 x approx. 3.000 N/m Working width: 3,0m Accessories: - Batt-feeding system - Needle loom exit rollers Machine is complete and fully functional Pos. 6 Edge trim opener Make: Autefa Type: unknown Serial-No.: unknown Year: unknown Pos. 7 Cutting and winding combination Make: unknown Type: unknown Serial-No.: unknown Year: unknown Working width: 3,0m - regulation with tension control unit - 4 longitudinal cuts with driven disc knifes, no bottom knifes - Moving driven disc knife for cross cut - Surface winder, roller diameter 400mm Accessories: - The winder can be “covered” with a table including scale Machine is complete and fully functional Pos. 8 Suction and filtration unit Make: self-made - Suction hoods for machines - Bagfilter for exit air - Several fans Pos. 9 Complete tool setup for servicing the line Pos. 10 Other Accessories: - Unwinding device for surface materials behind cross lapper

استعلام قیمت

فروش توسط

7روز ضمانت برگشت پول